Wittekindstraße 27 - 35 D-32758 Detmold Fon   +49 5231 7604-0 Fax   +49 5231 7604-28 E-mail   vertrieb@kiesow.org Web   www.kiesow.org

Products  |  Electroplating Electrolytes for Electroplating Our customers all over the world appreciate and benefit from the excellent performance of our electroplating solutions which generate high quality metal deposits even under severe working conditions. The electrolytes are suitable for both barrel and rack plating.  CHELUX® - cyanide copper electrolyte  RUBIN - bright copper process  ORION® and SIRIUS - bright nickle electrolyte  MERKUR - satin nickel process  SAPHIR® - bright and hard chromium process  PROMAT - cyanide zinc process  TOPAS - alkaline non-cyanide zinc process  AZUR - acidic zink process  KORONA® - acidic bright tin process  ACHAT - cyanide brass electrolyte  TURMALIN - alkaline, cyanidefree Copper electrolyte CHELUX® - cyanide copper electrolyte Dense and adherent deposits even for thin copper layers Fine-crystalline ductile copper coatings Excellent throwing and covering power which is essential for copper plating of zinc die castings RUBIN - bright copper process Ductile and tension free deposits Excellent bright throwing power, nodulisation is minimized Unsurpassed levelling action Wide temperature range (18 - 35°C) Only one brightner is needed for the current production ORION® and SIRIUS - bright nickle electrolyte Wide current density range Remarkably ductile and brilliant deposits which are easy to chromium plate Excellent levelling power (up to 70 %); polishing and buffing operations can be reduced considerably Special additional agents for specific demands on request In combination with our semi-bright nickel electrolyte Pre-SIRIUS creates a first-class duplex nickel process with a potential difference of 80 - 110 mV between the nickel layers MERKUR - satin nickel process Uniform semi-bright deposits Dazzle-free nickel deposits with good finger print resistance Excellent properties for further chromium plating SAPHIR® - bright and hard chromium process Self regulating electrolyte without solid deposit (catalyst) Excellent bright throwing and covering power High current efficiency Current densities up to 100 A/dm² (hard chromium) Bright chromium deposits at a wide range of chromic acid concentration (175 - 300 g/I CrO3) Uniform deep black and abrasion resistant chromium deposits can be achieved by using type "TS" which has the same characteristics as other SAPHIR® electrolytes PROMAT - cyanide zinc process VARIO brighteners produce high lustre zinc deposits over a wide range of current density Excellent bright throwing power and uniform coatings VARIO additives work in zinc baths with low, medium or high cyanide concentrations Brilliant deposits also without rod movement or bath agitation The version VARIO 40 is supplied as concentrate TOPAS - alkaline non-cyanide zinc process Tension-free deposits Excellent throwing power High current densities and excellent layer distribution Easy maintenance with zinc regeneration tank and steel anodes AZUR - acidic zink process Non-combustible additives which do not contain any alkylphenole ethoxylates. They can be diluted with water as required The electrolyte runs at 18 - 60 °C and does not become turbid High brilliant and ductile deposits at high current densities Very little foaming when used with air agitation KORONA® - acidic bright tin process Deposits are resistant against finger-prints, tarnishing and easy to solder Wide current densities and temperature range with uniformly layered deposits No yellowish deposits, not even during breaks in production ACHAT - cyanide brass electrolyte The colour of deposits can be varied from reddish to light yellow by the addition of a special additive which stabilises the colour With exposure times up to 5 minutes, the brilliance of pre-plated nickel layers is maintained. Deposits over 7µm can be coloured antic, black or something similar using our PROSEAL Color BM TURMALIN - alkaline, cyanidefree Copper electrolyte Dense, adherent and semibright copper layers substitutes cyanide copper plating solutions Excellent throwing power Give your electroplating racks a protective coating with our KIESOplast.

Print page    Close page This site has been printed on: 04.09.2010 | 19:47:44 o'clock